Work out a practical TV mounting height before you drill. Get a suggested bracket centre, drilling zone, screen position and a comfort check for lounge, bedroom and fireplace-style setups.
Most people do not really want a theory lesson about eye level. They want to know where the bracket should go on the wall. This calculator puts the most useful installation number first, while still showing the screen centre, bottom edge, top edge and a practical comfort check.
All measurements shown are guide measurements taken from the finished floor. That makes the results easier to mark out accurately on site and easier to compare against units, fireplaces and power points.
All results below are guide measurements from the finished floor and should be checked against your actual TV, bracket and wall before drilling.
Most lounge TVs want to stay closer to seated eye level. Bedroom and fireplace installs often need a slightly different compromise.
The screen centre matters, but the bracket centre and drilling zone are usually the figures that make the install easier in the real world.
Always compare the suggested bracket zone against your actual bracket dimensions, cable exits, power points and wall construction.
People tend to judge from standing height or aim for a dramatic feature wall look. That can work visually, but the TV often feels less comfortable once you sit down for longer viewing.
Bedrooms, open-plan rooms, family spaces and fireplace walls do not always allow the textbook position. In those situations, getting the cleanest practical compromise is often the right call.
Check everything from the finished floor, use a tape you trust, and confirm the final bracket fixing points before drilling. A few minutes of measuring can save a lot of patching up later.
If you are in Corsham or the surrounding area and want the TV positioned neatly and securely, Handyy can help with sensible placement, correct fixings, tidy installation and a cleaner end result.
In many living rooms, a good starting point is for the centre of the screen to sit close to seated eye level. Room layout, furniture, fireplace height and bracket type can all shift the final position slightly.
Yes. The calculator is designed to give practical guide measurements from the finished floor, which is usually the most useful way to mark out a TV position on site.
Bracket offset is the distance between the middle of the TV and the actual centre of the bracket fixing position. On many setups, the bracket fixing point sits below the screen centre, which is why this number matters.
It gives you a practical planning guide, but you should still check your actual TV and bracket dimensions before drilling. Different brackets place the fixing holes differently.
Often yes. Where a TV has to sit higher than ideal, a tilt bracket can improve the viewing angle and reduce the feeling that the screen is towering over the room.
